Quanitszip Gnerl Aerospace Fighter/Attack Plane

A-FP2 Gnerl Fighter Pod Aerospace Fighter Attack Plane 3

ROBOTECH Technical Files

by Pieter Thomassen, with Peter Walker

edited by Tim Wing

Attachments:

  • Gnerl reference file
  • Gnerl gallery

Designation: Quanitszip Gnerl Aerospace Fighter/Attack Plane

I. Dimensions:

  • Length: 20.6 meters
  • Width:  14.2 meters
  • Height: 14.2 meters
  • Weight (full load): 40.25 metric tons (Models 1 and 2), 42 metric tons (Model 3)

II. Type:

  • Design: Quanitszip design bureau.
  • Builder: Numerous yards and factory satellites throughout the Tirolian Mercantile Empire.
  • Type: One man aerospace fighter and attack plane.

III. Service History:

  • Gnerl Model 1: Served with all arms of the Regular Zentraedi Forces and Border Fleets from 1891 onwards, replacing the Soarove attack fighter.
  • Gnerl Model2: Served with all arms of the Regular Zentraedi Forces and Border Fleets from 1899 onwards, replacing the Soarove attack fighter.
  • Gnerl Model 3: Served with the Zentraedi Garrison Forces and Border fleets from 1904 onwards, replacing the Soarovela fighter.
  • FA-100 Swift (Refit): Served with the UN Spacy from 2012 until 2017, with the UEDF Tactical Armored Space Corps from 2018 until 2021, with the REF/UEEF Tactical Naval Corps from 2018 until 2026 and with the Colonial Defense Forces from 2019 until 2032.

IV. Propulsion:A-FP2 Gnerl Fighter Pod Aerospace Fighter Attack Plane 5

(All)

  • Three Varrebotzs type 49 plasma-shock expansion engines in the back. The thrusters have a maximum output of 190 kN for short periods and a sustainable output of 120 kN.
  • Three Varrebotzs type 50 plasma-shock expansion engines with vectorable nozzles (drawing their plasma from the type 49 engines), mounted in the back between the type 49 engines. These thrusters have a maximum output of 45 kN for short periods, and serve both as attitude thrusters and as boost engines for emergency accelerations.
  • Four Varrebotzs type 51 aplasma-shock expansion engines (drawing their plasma from the type 49 engines) in two pairs, one to port and one to starboard, in the center of the flanks. These engines are the primary jaw and roll attitude thrusters and have vectored thrust capabilities. Each thruster has a maximum sustained output of 78 kN.
  • Assorted attitude thrusters, fed from the type 49 engines.
  • Fuel: 20 standard canisters of protoculture.

(Models 1 and 2)

  • One Varrebotzs type 54 plasma-shock expansion engine (drawing its plasma from the type 49 engines) under the cockpit. This engine is the primary VTOL thruster and has limited vectored thrust capabilities. This thruster can deliver 400 kN for less than a minute during take-off and landing, or about 100 kN sustained thrust.

(Model 3)

  • Four Varrebotzs type 57 plasma-shock expansion engines under the cockpit. These engines are the primary VTOL thrusters and have vectored thrust capabilities. This installation can deliver 150 kN sustained thrust per engine or 180 kN for short periods.

V. Performance:

  • Maximum speed @ sea level: 1400 kph (in Earth-like atmosphere) (Model 3 slightly less)
  • Maximum speed @ 40,000 m: 5890 kph (in Earth-like atmosphere) (Model 3 slightly less)
  • Stall speed @ sea level: 350 khp (in Earth-like atmosphere)
  • Combat radius: total delta-v 4.7 kps
  • Protoculture supply: average operational life 175 hours operational use.

VI. Sensory Systems: (All models)

Radar tracking:

  • VFAS1-SS (*) phased array radar with spherical coverage, for various scan/track, targeting, mapping, reconnaissance and navigation functions.

Optical tracking:

  • VFAS1-SS Multi-band digital camera system, for medium range all attitude infra-red imaging, optical and ultra-violet band detection and tracking.
  • VFAS1-SS Multi-frequency laser ranger and designator.
  • VFAS1-SS high resolution long range optical/IIR cluster in the nose, on top of the gun armament.

Tactical Electronic Warfare System (TEWS):

  • VFAS1-SS Radar Warning Receiver (RWR)
  • VFAS1-SS Infra-red Warning Receiver (IRWR)
  • VFAS1-SS Active sensor jammer system
  • VFAS1-SS Chaff and flare dispenser

(*) Terran designation. The Tirolian designers considered the sensors part of the design and did not assign separate designations for these systems.

VII. Armament:

Cannons:

(Model 1)

  • 3 x Makral Martszur-3 (also known under the Terran designation of PB-8) triple-barreled rotary particle beam cannons mounted in the extreme nose of the plane. The sub-barrels can each fire a particle beam of 2.5 MJ every second, all can be fired in parallel, for maximum localized damage, or in series for increased chances of a hit. Typically, Gnerl pilots fired in serial mode.

(Models 2 and 3)

  • 2 x Makral Martszur-4 (also known under the Terran designation of PB-8) triple-barreled rotary particle beam cannons mounted in the extreme nose of the plane. The sub-barrels can each fire a particle beam of 2.5 MJ every second, all can be fired in parallel, for maximum localized damage, or in series for increased chances of a hit. Typically, Gnerl pilots fired in serial mode.
  • 1 x Makral Rianulran-23 (also known under the Terran designation of AD-1) particle pulse cannon mounted in the extreme nose with the Makral Martszur-4 cannons. This cannons fires distinct packages of particle energy (‘annihilation discs’) at 3500 m/s in bursts of up to 1 second in duration. A maximum duration burst contains 25 MJ of particle energy, and will usually impact in a concentrated area. The Makral Rianulran 23 cannon has a recharge cycle of 8 seconds, yielding a rate of fire of 7.5 rpm.

Missiles:

(All)A-FP2 Gnerl Fighter Pod Aerospace Fighter Attack Plane 18

  • 3 x Touwhaug Gativar-9 missile launchers, lying flush with the skin between the engines. Each missile launcher carries 2 Whernid Awhaug (codenamed Mitten by the UEDF) missiles in a ready for launch position, and four more Whernid Awhaug missiles as reloads. The total load-out for the Gnerl mecha is 18 missiles.

(Model 3 only)

  • 1 x hardpoint on the upper pods for a Touwhaug Rasilszt-13 missile launcher. The missile launcher carries 5 Gerluj Touwhaug, Gluuk Awhaug or Vlwheralt Awhaug (codenamed Miff, Megrim or Morgoth by the UEDF) missiles, or a combination of these. Due to excessive drag and limited utility this option was rarely used.

VIII. Armor:

(All)

The armor of the Gnerl is composed of an advanced titanium-steel alloy. The armor stops all small arms and heavy infantry weapons fire, provides reasonable resistance to light mecha-mounted weaponry, such as the Zentraedi 22.3mm HE autocannon round, and poor resistance to medium mecha-mounted weaponry, such as the Valkyrie’s 55mm APFSDS round.

The Gnerl provides full protection from nuclear, biological, and chemical hazards, using an fully enclosed cockpit environment. The internal consumables supplies can provide atmosphere for four days maximum, and the pilot can pack sufficient food and water containers for that period, although the cockpit will be somewhat cramped.

A-FP2 Gnerl Fighter Pod Aerospace Fighter Attack Plane 1
IX. Development:

First deployed operationally in 1891, the Gnerl was the last trans-atmospheric fighter used by the Zentraedi. In the early teens of the 21st century, when the last Gnerl were produced, a successor design was only in the earliest planning stages.

The Gnerl were fast trans-atmospheric fighters with an egg-shaped nose housing a powerful cannon installation and three thrusters at the back. The hull also accommodated three double dual-purpose missile launchers nested between the engines. The shipborne fighters had landing skids and small VTOL thrusters, enough to let the mecha land on a planet if required. However the margin for error was small during these operations. The planetary model had a more extensive VTOL setup, enough to let the fighter make a safe landing even if two of the thrusters were not operational. The redundancy was necessary because they relied on body lift and thus had no wings as such, which made for high stalling velocities and extensive use of the VTOL thrusters.

Three models of the Gnerl were built, of which the first two were identical in all but the cannon armament. The first model carried three identical particle beam cannons, the second model carried two of these cannons plus a burst-fire pulsed particle cannon. The latter version was intended as a ship/ground attack variant, and therefore carried a weapon (the pulsed particle beam) that could hand out larger amounts of damage in a small area in a shorter time than the other model could. This came at the price of a somewhat less effective air-to-air cannon armament.

These two models were carried on board Zentraedi warships and as such had simple landing skids and a limited VTOL installation, relying instead on equipment in the ships themselves to position themselves for launch. The third model had wheels rather than skids and a more robust VTOL system, and was intended to operate from groundside airfields. It had the cannon armament of the attack model, and two (seldom used) hardpoints for ten more medium missiles.

Compared to contemporary 2010 Terran designs (mainly the VF-1 Valkyrie) the Gnerl were faster, had a better thrust/weight ratio, and carried a far more lethal cannon armament (especially in space). The maneuverability in an atmosphere was acceptable, and was considered satisfactory in space. The missile armament was larger in numbers than that of the standard Valkyrie, but even though several Whernid Awhaug missile variants existed, not nearly as varied and capable as the external loads that could be carried by the Terran mecha. Hence, the shipborne Gnerl is perhaps best characterized as an interceptor with secondary attack capabilities, and the third model as a mediocre attack fighter, while the Terran mecha were more true swing-role designs.

The UN Spacy, and later the UEDF and UEEF, used the Gnerl after the First Robotech War as the FA-100 Swift. Several upgraded variants were fielded, some with minimal changes and some with major modifications to include full Terran sensor and weapons refit and conversion to human sized crew compartments. Theses variants saw limited use during the Sentinels Campaign, but were by and large transferred to the Colonial Defense Forces by the mid twenties.

 


 

Robotech (R) is the property of Harmony Gold. The Super Dimension Fortress Macross (R) is the properties of Big West Advertising and Studio Nue. This document is in no way intended to infringe upon their rights.

Original artwork by: Shoji Kawamori, Miyatake Kazutaka, Haruhiko Mikimoto and Hidetaka Tenjin

Acknowledgement is extended to the work of Egan Loo and the Macross Compendium. Egan Loo is given all credit for all quotes and paraphrasing of the Macross Compendium that has been utilized in this publication. 

Images Courtesy of Chad Wilson (Marchly) and the Macross Mecha Manual. Chad Wilson is given all credit for all images from the Macross Mecha Manual that have been utilized in this publication. 

Acknowledgement is extended to Peter Walker, Pieter Thomassen and Robert Morgenstern of the unofficial Robotech Reference Guide. Peter Walker, Pieter Thomassen and Robert Morgenstern are given credit for all quotes and paraphrasing of the unofficial Robotech Reference Guide that has been utilized in this publication. 

Images From – Macross Perfect

Content by Pieter Thomassen, with Peter Walker and Rob Morgenstern, edited by Tim Wing

Copyright © 2003, 2000, 1997, 1995 Robert Morgenstern, Pieter Thomassen, Peter Walker; 2015 Tim Wing